oops, guess I screwed up the link, try this: http://keay3.blogspot.com/

-k

:: Hey Alec,
::
:: Hope you have already gotten some replies. For the
:: rigging stuff, I would hit up Steven Seals site. There
:: is a guide there that speaks directly to the sizing of
:: shroud size etc. I have a couple of diagrams of relative
:: position of running rigging hardware on my blog
:: (http://keay3.blogspot.com/2011/03/santana-22.html).
:: This may or may not be helpful as it is not relative
:: positioning. Good luck.
::
:: Keay
::
:: :: Hi everybody,
::
:: :: I recently bought a Santana 22´Schock, manufactured in
:: :: Australia.
::
:: :: It was in a shocking bad condition. The cabin was
:: :: completely ruined by years of water inside, the fibre
:: :: glass was damaged everywhere, etc, etc....
::
:: :: Unhampered by any knowledge of what I was embarking on,
:: :: I stripped the boat bare and started the big project...
:: :: Now - after 10 months - the job is coming to an end. It
:: :: all looks fabulous again. But....I have´ve got no clue
:: :: where to re-attach the hardware onto the deck.
::
:: :: It would help me very much if anybody out there could
:: :: send me some pics with details from the hardware and if
:: :: possible with an written explanation of its function.
:: :: Another empty space is the rigging. Some detailed pics,
:: :: measurements and sizes would also be very welcome.
::
:: :: Thanks for your help!
::
:: :: Alec Sander, Innisfail, Far North Queensland - Australia