Hey Alec,

Hope you have already gotten some replies. For the rigging stuff, I would hit up Steven Seals site. There is a guide there that speaks directly to the sizing of shroud size etc. I have a couple of diagrams of relative position of running rigging hardware on my blog (http://keay3.blogspot.com/2011/03/santana-22.html). This may or may not be helpful as it is not relative positioning. Good luck.

Keay

:: Hi everybody,

:: I recently bought a Santana 22´Schock, manufactured in
:: Australia.

:: It was in a shocking bad condition. The cabin was
:: completely ruined by years of water inside, the fibre
:: glass was damaged everywhere, etc, etc....

:: Unhampered by any knowledge of what I was embarking on,
:: I stripped the boat bare and started the big project...
:: Now - after 10 months - the job is coming to an end. It
:: all looks fabulous again. But....I have´ve got no clue
:: where to re-attach the hardware onto the deck.

:: It would help me very much if anybody out there could
:: send me some pics with details from the hardware and if
:: possible with an written explanation of its function.
:: Another empty space is the rigging. Some detailed pics,
:: measurements and sizes would also be very welcome.

:: Thanks for your help!

:: Alec Sander, Innisfail, Far North Queensland - Australia