Hi everybody, I recently bought a Santana 22´Schock, manufactured in Australia. It was in a shocking bad condition. The cabin was completely ruined by years of water inside, the fibre glass was damaged everywhere, etc, etc.... Unhampered by any knowledge of what I was embarking on, I stripped the boat bare and started the big project... Now - after 10 months - the job is coming to an end. It all looks fabulous again. But....I have´ve got no clue where to re-attach the hardware onto the deck. It would help me very much if anybody out there could send me some pics with details from the hardware and if possible with an written explanation of its function. Another empty space is the rigging. Some detailed pics, measurements and sizes would also be very welcome. Thanks for your help! Alec Sander, Innisfail, Far North Queensland - Australia