I know there is at least one out there with the hull-deck joint filled and glassed over from the inside. I don't know the hull number or current owner, but the PO of mine had two S22's. He sold the one with the reinforced joint not too long after I bought his spare hull.

joe

:: Just wondering if anyone has tried to beef up the
:: hull-to-deck joint on one of the original S22s. I just
:: removed the rubrail on the boat that I'm refinishing and
:: was surprised at how insubstantial the joint seems. In
:: one section a noticeable gap actually opens up if I
:: press on the hull just below the joint.